Joye eGo-C Tank Atomizer Heads

Usage Suggestions:

After puncturing the tank cartridge, insure that there is no "hanging chad" on the cartridge. If there is, use a stick pin or other sharp device to remove the chad or let it fall into the tank cartridge.

When filling the tank cartridge, leave approximately a 2mm space unfilled.

When inserting the tank cartridge into the atomizer, line up the groves on the cartridge with the flat sides of the plate in the atomizer.

Insure that the tank is fully seated in the atomizer.

Do not inhale strongly. A 3-5 second, slow steady inhale, like sipping a soda thru a straw, will work best. Inhaling strongly will result in too much liquid being siphoned into the atomizer. This will flood the atomizer, causing excessive leakage and possibly liquid being pulled into the users mouth.

Extremely thin e-liquid can also cause excessive leakage.

Most leaking problems result from not seating the cartridge properly or inhaling too strongly.

Please understand that there will always be some condensation or leakage on the plate of the atomizer. That is the current nature of the tank system.